14 July 2014

Lowongan Kerja Migas Eni Indonesia 2014

Lowongan Migas Eni; 10 positions

Eni is a major integrated international oil and gas company based in Italy, with interests in 85 different countries, and employs approximately 79,000 people worldwide. Eni has Exploration & Production activities in Italy and other areas worldwide such as West &amp
; North Africa, US, South America, North Sea, Kazakhstan and Asia. In Indonesia, Eni participates in thirteen PSCs, including nine in Deep Water areas, with an active exploration and development program.

To support its progressive growth and build the organizational capability, Eni Muara Bakau BV is looking for qualified personnel with high motivation, initiative and integrity to fill in the following positions:


1. X-tree Site Representative – PDV16

Responsibilities :
• Site inspection and Interfacing with the Contractor on Technical and Delivery issues.
• Ensuring Delivery of the Subsea Completion System (including all the Tree and Work Over Risers Tools) in line with the Project objectives, technical interfaces and requirements.
• Review of Contractors design of the X-mas Tree System and Work Over System (including all the Tree and Work Over Risers Tools) design and preparation of comment sheets
• Expediting of technical interfaces
• Daily site inspection and interfacing with contractor
• Daily reporting to SPS Work Package Lead and Xtree & WO Engineer
• Follow-up the detail engineering performed by the SPS Contractor relevant to the X-mas Tree System and Work Over System (including all the Tree and Work Over Risers Tools).
• Reviewing and commenting technical documentation produced by the Contractors (e.g. technical reports, specifications, procedures, drawings, etc) ensuring the implementation of the established procedures, applicable codes, COMPANY standards and specification, Contract, International standards and Engineering best practices;
• Resolving ongoing technical issues concerning all aspects of the Subsea Completion System, X-mas Tree System and Workover System (including all the Tree and Work Over Risers Tools);
• Monitoring and reporting technical progress to the SPS Work Package Leader and Xtree & WO engineer Manager;
• Ensure that all internal and external Interfaces (especially with Rig Contractor) are correctly managed by Contractor;
Witnessing of acceptance tests for all the the X-mas Tree System and Work Over System (including all the Tree and Work Over Risers Tools) Scope of Supply (FAT,EFAT, SIT)
• Support to offshore installation, commissioning and production start-up

Requirements :
• The job holder must have Engineering degree (Mechanical and Instrumentation Engineer).
• Experience in Project Engineering in a major oil and gas company for X-tree & Work Over System
• Not less than 7 years of working experience in oil & gas industry in Subsea Project.
• Not less than 5 years of experience of working with contractors and supervising the contractors.
• At least 2 similar activities (subsea EPC Project follow-up)


2. Site Support Specialist – PDV15

Responsibilities :
To carry out the day to day administration of the contractual and related matters on Contracts, to ensure contractor compliance with the terms and conditions of the contract and to oversee and assist Project Teams in the management of Execution Contracts

Requirements :
• Bachelor Degree in Quantity Surveying or Engineering Discipline
• Minimum of 5 years experience of which a minimum of 3 years as a Contract Engineer involved in the preparation, negotiation and administration of a broad range of complex technical contracts/purchases with the attendant knowledge and experience of commercial, insurance and legal issues is essential.
• Experience in working directly/indirectly with an Oil and Gas company


3. Control System Site Representative – PDV17

Responsibilities :
• Selection of the best technical/economical solutions and products for the production and work over subsea instrumentation and control systems, ensuring overall design integrity and compliance with international standards, company guidelines and engineering best practices and system performance.;
• Site inspection and Interfacing with the Contractor on Technical and Delivery issues.
• Ensuring Delivery of the production and work over subsea instrumentation and control systems is in line with the Project objectives, technical interfaces and requirements.
• Review of Contractors production and work over subsea instrumentation and control systems design and preparation of comment sheets
• Expediting of technical interfaces
• Daily site inspection and interfacing with Contractor.
• Daily reporting to Control Systems and Umbilical Coordinator and Subsea SPS Work Package Leader.
• Witnessing of acceptance tests
• Support to offshore installation, commissioning and production start-up Follow-up the detail engineering performed by the SPS Contractor relevant to subsea production and work over subsea instrumentation and control systems.
• Reviewing and commenting technical documentation produced by the Subsea Control System Contractors (e.g. technical reports, specifications, procedures, drawings, etc.) and ensuring the implementation of the established procedures, applicable codes, company standards and specification, Contract, International standards and Engineering best practices; comments/concerns from Company and other Contractors are implemented or properly addressed.
• Reviewing and commenting technical documentation produced by the Installation Contractors (e.g. technical reports, specifications, procedures, drawings, etc.) and ensuring the implementation of the comments/concerns from Company and Subsea Control System Contractor are implemented or properly addressed.
Resolving ongoing technical issues concerning all aspects of subsea control equipment;
• Monitoring and reporting technical progress to the SPS Work Package Leader and Subsea Control Engineer.;
Ensure that all internal and external Interfaces (especially with FPU) are correctly managed by Contractor;
• Witnessing of acceptance tests for all the Production Control System Scope of Supply (FAT,EFAT, SIT, etc.) and close out any punch list.
• To attend and support to the offshore installation, commissioning and production start-up.
• Providing support and advise to the Company representative during offshore campaign related to the installation/testing/pre-commissioning/commissioning of Subsea Control System Equipment

Requirements :
• Electric / Electronic / Physic Engineering degree (preferably automation specialization).
Engineering degree (Electronic engineering, preferably automation specialization)
• The job holder must have an Electric / Instrument / Physic Engineering.
• Experience in Project Engineering in a major oil and gas company for Subsea System.
• Not less than 7 years of working experience in oil & gas industry in Subsea Projects. (Offshore).
• Not less than 5 years of experience of working with contractors and supervising the contractors.
• Not le than 3 years of instrumentation and automation experience (5 preferable).
At least 2 similar activities (subsea EPC Project follow-up)

4. Umbilical Site Representative – PDV18

Responsibilities :
• Site inspection and Interfacing with the SPS Contractor on HSE, Quality and Delivery issues
• Interfacing with the Umbilical Engineer and Installation Contractor;
• Ensuring Delivery of the subsea umbilical system in line with the Project objectives, technical interfaces and requirements.
• To review the Installation Contractors design documentation and drawing/layouts, reports, installation analysis, pre-commissioning procedures ensuring that Project objectives, industry standards and best practices for safety, reliability and cost are met;
• To review relevant subsea Contractors documents and drawings and provide installation related inputs;
• Expediting of relevant technical interfaces
• Daily reporting to Umbilical Engineer and SPS Package Leader
• Witnessing the Umbilical FAT and EFAT.
• Support to offshore installation, commissioning and production start-up at yard and offshore;
• Follow-up the detail engineering performed by the Installation Contractor relevant to subsea umbilical, distribution.
• Reviewing and commenting technical documentation produced by the Installation Contractors (e.g. layout, technical reports, specifications, procedures, drawings, etc) ensuring the implementation of the established procedures, applicable codes, COMPANY standards and specification, Contract, International standards and Engineering best practices;
• Resolving ongoing technical issues concerning all aspects of subsea umbilical system ;
• Monitoring and reporting manufacturing progress to the SPS Work Package Leader and Umbilical Engineer;
• Ensure that all internal and external Interfaces (especially with RFI & FPU) are correctly managed by Contractor;
• Support to offshore installation, pre-commissioning and production start-up/commission.
• Participate with installation Contractor for mobilization, load-out at site, onshore support, preparations for the campaign, transpooling, testing activities, laying, pre-commissioning and start-up/ commissioning of umbilical and distribution system;
• Participate in offshore installation and liaise with both Umbilical suppliers technician on-board and the installation contractor to ensure installation contractor is following the installation guidelines provided by umbilical supplier and also following approved installation procedure prepared by installation Contractor

Requirements :
• Engineering degree (Mechanical engineering, preferably electronic specialization)
• The job holder must have Mechanical/Electrical/Instrument Engineering.
• Experience in Project Engineering in a major oil and gas company for Umbilical & Subsea Control System
• Not less than 7 years of working experience in oil & gas industry in Subsea Projects
• Not less than 5 years of experience of working with contractors and supervising the contractors.
• At least 2 similar activities (subsea EPC Project follow-up and installation)

5. Manifold Site Representative – PDV19

Responsibilities :
• To supervise the onshore fabrication of manifolds and SSIVs ensuring that contractor works are performed according to project specifications, budget and schedule and respecting all the relevant QA standards and HSEQ procedures and regulations
• To learn and became confident with all COMPANY standards and Project Specification in order to verify Contractor compliance;
• To ensure that the SSIV, manifolds and ROV tools technical interfaces with other systems or activities of the Project are considered by the Contractor at all times;
• Perform Site inspection and interfacing with the Contractor;
• To ensure delivery of the SSIV, manifolds and ROV tools with the Project schedule and objectives.
• To assist the preparation of user manual and installation procedure by Contractor and assist installation campaign.
• To interface with COMPANY Project Interface Engineer to manage and expedite all the SPS Contractor interfaces with other Project Contractors.
• Follow-on the construction activities of the discipline supporting the Site Representative or the Inspector
• Attendance during construction and installation activates at site.
• Assure compliance of SPS Contractor with job standards and specifications for the discipline.
• Technical follow-on/troubleshooting during construction, installation, commissioning and start-up
• On site assistance (drilling rig, construction vessel, FPU) to Company, with the follow up of the Vendor personnel;
• Support the SPS Work Package Leader in the expediting and inspection at Vendor site during the construction and offshore installation assistance.
• To supervise manifold and SSIV installation activities, monitoring contractor performance, assuring the application of all the relevant HSEQ and QA procedures, and providing technical support as required

Requirements :
• The job holder must have Engineering degree (Mechanical & Instrumentation engineering).
• Experience in Project Engineering in a major oil and gas company for Subsea System (SSIV, Manifolds & ROV Tie-in system)
• Not less than 7 years of working experience in oil & gas industry in Subsea Projects
• Not less than 5 years of experience of working with contractors and supervising the contractors.
• At least 2 similar activities (subsea EPC Project follow-up)

6. Onshore Detailed Engineering Coordinator – PDV20

Responsibilities :
• To manage all engineering design activities related to the Onshore Receiving Facilities. The activities include managing a multidisciplinary engineering team during the detailed engineering and project execution phases, ensuring that the design meets Company requirements, project objectives for cost, schedule, safety and environmental impact aspects.
• Provides technical and project management support to eni Muara Bakau BV management

Requirements :
• Bachelor Degree in Engineering or higher
• Fluent in English both speaking and writing
• Minimum of 12 years Oil & Gas Industry experience and at least 5 years in project management experience
• Minimum of 5 year experience in onshore pipeline design and/or construction, 5 year experience in onshore plant design and/or construction
• Minimum 3 years of experience of working with contractors and supervising the contractors in engineering activities
• Good knowledge of industry standards regarding onshore pipelines, piping plan and civil design.
• Good knowledge and understanding of the contractual terms, conditions and requirements and the particular Scope of Work to be performed by the all the Project Contractors and onshore package in particular
• Experience in reviewing and commenting detailed engineering design and other related documentation (i.e. technical specifications, SOW, procedures, reports, drawings...).

7. Installation Coordinator – PDV21

Responsibilities :
• To supervise offshore platform, sea-line, flowline and riser systems installation activities, monitoring contractor performance, assuring the application of all the relevant HSEQ and QA procedures, and providing technical support as required. • Timeliness and accuracy of installation control information provided, including: cost control information, executed works compliance to project technical specifications, work progress certification
• Monitoring installation activities controlling that their execution is in line with project plans and highlighting any possible deviations suggesting possible solutions
• Verifying installation works compliance with project specifications, company procedures (including HSEQ)
• Preparation of daily installation reports
• Contractors daily progress report review and acceptance
• Managing supervision team verifying that all the installation activities are performed according to specifications
• Interfacing with the installation contractor during offshore operations


Requirements :
• The job holder must have Engineering degree.
• Experience in Project Engineering in a major oil and gas company for installation offshore facilities.
• Not less than 7 years of working experience in oil & gas industry.
• Not less than 5 years of experience of working for offshore installation.
• Good knowledge and understanding of the electrical for offshore development such as:
• Contracting (Generic) • Specialist Knowledge: Engineering knowledge in the specialist activity
• Construction & Installation: Integration Testing, Installation, Offshore Installation Supervision

8. Topside Construction Specialist – PDV22

Responsibilities :
• To be responsible of the construction site and act as Deputy of the Topsides Construction SPT, with particular respect to team management, HSE, construction and quality follow up.
• Timeliness and efficiency of construction works execution
• Managing a team of 8-14 team members (inspectors, dcc, field engineers)
• Achieving project quality standards
• Assuring an effective construction physical progress control
• Applying of HSEQ local norms and company standards
• Meeting HSEQ targets.
• Liaising with Contractor management and third parties (class, MWS) and representing Company during official occurrences.
• Continuous reporting of actual site situation to management, by all the requested modalities (presentations, speeches etc).

Requirements :
• Experience in construction and site management
• Not less than 6 years of working experience in shipbuilding yards or oil & gas industry.
Knowledge, Technical or Professional Skills:
• Economics General: Economics Planning and Control
• Contracting: Variations and Claim Resolution
• Organization Processes: Work team management methodology, Documentation management, Site Management, Contract Management
•Construction & Installation: Site Construction, Installation, Plant construction, Control system knowledge, Inspection, control and testing techniques
• Good communication skills at all levels.
• Leadership and experience of working in multi-National environment

9. Topside Material Management Specialist – PDV23

Responsibilities :
• Ensure material integrity from Contractor receiving at Yard to handover to Company.
• Ensure, in coordination with discipline site supervisors that material and equipment are properly preserved according to project requirements from receiving to Yard to Handover to Company.
• Control Contractor preservation plan and report any deviation from Project requirements.
• Follow up daily warehousing activities, scheduled and unscheduled
• Attend QC inspections called by contractor, representing ENI function at the Contractors construction locations within the project
• Verify material feasibility aspects related material availability versus construction schedule to Topside site superintendent.
• Verify Contractors expediting and shipping status and weekly report to Topside site superintendent, advise timely possible constrains that could affect the schedule in terms of material availability at Yard or delay in shipping and clearance activities.
• In agreement with ENI Site HSE officer and superintendent, stop further work when major/critical HSE deviations are detected

Requirements :
• The job holder must have an Engineering or technical degree, preferably in Mechanical Engineering.
• Experiences in Oil and gas material management
• Not less than 8 years of working experience in oil & gas industry, both offshore and onshore.
• Not less than 5 years of experience of working with contractors and supervising the contractors in material management activities.
• Working in a prior similar role and experience in material material management software GEMAPI will be beneficial
• Good knowledge of Microsoft office: Word, excel, power point for an effective site reporting.
• Knowledge of Local custom and shipping procedures.
• Confidence with material international standards.

10. Piping Supervisor Topside – PDV24

Responsibilities :
• Engineering supervision of mechanical work completion by contractors according to Method Statement.
• Control that construction schedule is followed by contractors.
• Control construction plans and quality control.
• Technical acceptance of completed mechanical work and facilities and as-built documentation

Requirements :
• The job holder must have an Engineering or technical degree.
• Experience in Project Engineering in a major oil and gas company
• Not less than 7 years of working experience in oil & gas industry, both offshore and onshore.
• Not less than 3 years of experience of working with contractors and supervising the contractors.

Interested applicants please send your CV to:
recruitment@eniindonesia.co.id
(Please mention the position applied & position code on the email subject)
Please note that applications may not be reviewed if received after 30 July 2014. We regret that only shortlisted candidates will be notified.

Langganan Lowongan Via Facebook, Tekan Like